Metal powder coating refers to various powder coatings containing metal pigments (such as copper gold powder, silver aluminum powder, etc.), which can show a bright and luxurious decorative effect, and is very suitable for spraying furniture, accessories, automobiles and other indoor and outdoor objects. In terms of manufacturing process, dry mixing method is mainly used in domestic market, and bonding method is also used in international market.
Painting method
Friction gun is not suitable for metal powder coating. In most cases, electrostatic spray gun is recommended for painting. Since this type of product contains metallic pigment, it is necessary to ensure good grounding of the system when using the electrostatic gun. At the same time, set a low electrostatic voltage and powder output to prevent ignition during spraying. The effect of film formation is closely related to the setting, quality or brand of the spray gun. After spraying for a long time, a large amount of metal powder may accumulate at the discharge needle of the spray gun, which requires the operator to clean the discharge needle regularly.
gloss
In most cases, due to the large error, it is not recommended to use glossmeter to measure the gloss of metal appearance film, but only use visual contrast method to judge whether it is consistent with the standard sample plate.
Recyclability
For the powder made by dry mixing method, due to the separation phenomenon in the spraying and recycling process, there will be a certain difference in the metal pigment content between the recycled powder and the new powder, which may lead to the inconsistent appearance of the coating film and the phenomenon of color deviation. This is due to the difference in properties between metallic pigments and powder particles. We suggest that the ratio of recycled powder to new powder should be at least 1:4. If the powder coating is made by bonding fixation method, because the ratio between metal pigment and powder particles is relatively fixed, the recycled powder can be completely reused.
Glossing layer
It has the following advantages to spray the finishing layer on the metal powder coating
1. Enhance the stone impact resistance of metal powder coating.
The effect of metal powder coating is increased.
3. Solve the abradability of metal pigment.
4. Improve the weatherability of metal powder coating.
In order to ensure the appearance effect of the finish coat, the workpiece must not be polluted. Therefore, it is generally necessary to have a fully automatic spraying line and two sets of independent spraying rooms for separate coating.
It is recommended that the user should not spray the coating under normal conditions. It can only be used when the requirements are very high, such as household appliances, automobile wheel hub and outdoor use (to ensure weather resistance).
proposal
For the same batch of powder coating, try to avoid the same batch of powder coating.
2. Keep spraying conditions stable as far as possible
a) Using the same set of spraying equipment, using the same voltage, air pressure and other parameters;
b) Keep the distance between the spray gun and the workpiece unchanged as far as possible, and keep the stability of film thickness as far as possible;
c) Ensure that the powder coating has been fully fluidized before spraying;
d) When using recycled powder, the ratio of recycled powder to new powder should be at least 1:4.
3. Try to avoid using metal powder coating to spray the workpiece with complex shape or deep depression.
4. It is suggested that multiple workpieces assembled together should be sprayed at the same time.
07-22
Preparation and routine maintenance before using coating equipment
Before coating construction, the operator should know what preparation and daily protection should be done, otherwise the equipment will be damaged. Preparation before painting Before the coating
07-22
How to deal with the phenomenon that powder coating does not produce powder
1、 There are other impurities in the powder coating 2、 If the spray gun and powder feeder are not cleaned up for a long time, there is powder sticking on the nozzle end, and the powder outlet of the spray gun is blocked by the loose head 3、 The powder itself is damp and caking 4、 During construction, the air pressure is too low 5、 The solenoid valve doesn't work and there is no powder injection pressure output 6、 The powder conveying pipe connecting the spray gun is bent and may fa
07-22
Characteristics of Jiangmen spraying equipment
The smaller the resistivity of the powder, the easier the powder particles to release charge, the less adsorption force and easy to fall off. Therefore, the higher the resistivity of the powder, the
07-22
Advantages of Jiangmen powder coatings
1. Excellent film function The coating has metallic luster, brilliant multicolor effect and outstanding protection function, which provides colorful appearance decoration for industrial products su